Frame And Sash

Posted by on April 6, 2012 Comments Off on Frame And Sash

Joinery – is part of the window element, which is rigidly connected to the wall. In another way it can still be called 'a window box. " In some cases, the frame itself can hold the glass, that is, no additional elements in No window (wings, bars). In this case we speak of 'blank window', ie the window that is not open. Putting it makes sense when you're not going to use a window for ventilation. For example, if a small window out into a dull patio. Instead of glass in such a case, with a decorative purpose, you can insert stained glass.

Sash – the movable element of the window. Depending on the type of connection to the sash frame can open the doors, recline, or opened by rotating around a vertical or horizontal axis, and the window can be opened in different directions. Windows can be as solid, with two or three solid doors – in Most modern windows, and have a window and transoms. Ventilator – a small flap, connected to the frame. Designed ventilator for ventilation of rooms, especially during the cold period, when all the big open fold inappropriate. Transom – a flap that pivots the lower horizontal axis. As a rule, it is located at the top of the window. Windows with transoms are more characteristic of old structures, though if you want you complementary profiles included in each other, the partition between the doors are not needed.

These doors are called "wings of shtulpom. Shtulp – this bill profile, mounted on one of the wings to create a porch in Bivalve windows and doors. Deaf can not only be the entire window (when the windows are inserted directly into the frame), but also a separate wing. In this case, it does not open. This design is typical for two-or tricuspid windows.

Children

Posted by on March 11, 2012 Comments Off on Children

Drawings can go on a hot day easy on the eyes. At the site during a walk educator uses sand, snow, to show the image familiar objects. Stick, drawing a house, a doll, he says: "In the house lived a doll Katia. On this track (draws a line), she went for a walk. " Obtained as a picture-story. Turning to the children, he asks: "Who did Kate walks, who still lives in the house? "then proposes to build near the big house.

"In this house, the children will live," – says the teacher draws a large building and with children "come into the house." The drawings are not only enrich the game children, they contribute to the development of their orientation in space, helping to learn to compare images of objects by size: small house for a small doll, great – great for dolls, etc. At the request of the children and themselves can carry out simple drawings in the sand on the snow (of lines, simple shapes). You can use flanelegraf for examining existing forms and silhouettes. In winter, children draw on the snow. To do this, take a few plastic bottles in the lid makes a small hole, pour into bottles tinted water (eg, yellow, red and blue). Now, these bottles can be watered snow, colored spots are obtained, which, mingling with each other, will give new color.

It is better to draw on the trampled snow, but not on the loose. By the way, this multi-colored snow, you can sculpt colored snowballs. The process of painting, sculpture, folding completed forms should occur in the "co-creation" educator of children, cause them to desire to imitate the actions of an adult. Actions of this nature are a kind of preparatory phase for employment of children in drawing, modeling, application for the following age levels in 2-3 years, a baby begins to pay attention to the shade.

The Crush

Posted by on February 20, 2012 Comments Off on The Crush

Constantly had to go somewhere, run, fly. But when he could outrun the event, such as today, he fully enjoyed the anticipation, because everything in life is learned in comparison. During his table was sitting a company of young people. It seems that they were students. They chatted merrily, discussing some of his friends, not paying any attention to Girona. After drinking wine and smoking a cigarette, he became look around.

Observation point was what is called "upper class". From here he could see all four directions. In three of them are already approaching pageant. At the sidewalk were a few parked cars. Their owners have come here before it was blocked traffic.

The drivers are probably afraid that the crowd could accidentally damage the car, did their best to release the roadway, partially stopping on the sidewalk. On terraces of houses began to appear men. Some of them have prepared flowers to throw them under the feet of the holy fathers. Connection technology flows of people over many decades has been sharpened to perfection. In the first series were priests who were carrying the sacred icon. They converged at one point from three sides, and thus there is a regrouping. And move the columns do not slowed a step, to avoid the crush in the back rows. It was an amazing sight, the definition and synchronization performance reminiscent of speech gymnasts. But the sounds of hymns (each column had its own choir) gave him the majesty and solemnity, causing awe.

OpenID Influence

Posted by on February 1, 2012 Comments Off on OpenID Influence

This article aims to introduce, discuss and analyze the topic of social networking. In particular, we discuss the impact social networking site for OpenID today's society. VKontakte was a phenomenal thing for social networks, and that is so amazing that OpenID did not exist until 2006. A student of St. Petersburg University created it to allow other students to network communicate with each other, and he gathered all young people around the world. What is the impact on OpenID technologically advanced modern society? This allows people who probably would never have met each other personally – to communicate.

It is given birth new relationships and friendships. But the distance between people who are able to communicate in person, but instead decided to communicate on the Internet. This is just another element of society that is interested in exchanging information of intimacy, personal life. VKontakte is nothing more than a vehicle for communication, yet, but it's still a lot more than just communication. At first glance, you can learn everything from what the sex of the user OpenID, to information what religions believe users that they attend school, and their likes and dislikes, just one click.

According to experts, many people now spend at least 50 percent of their waking hours on-line time (Fabian, 2008). For many people, most of that time spent on social networking sites like OpenID. People put a huge part of their personal lives when they leave their feelings, interests and ideas on the web. And the society, seems to be becoming more open to the lack of privacy, in fact, users of OpenID seems to be content with this, adding a very personal and very intimate things in their profiles, that anyone who becomes their another, you can view these things. So it seems that our society has become more open now, and it became much more open to accommodate intimate information on the Internet, but rather anonymous in the fact that users never see, does not occur, and do not touch face to face, they just talk. And so even if they know the intimate details, they do not really know a man in every detail. According to "Fabian" 'OpenID and classmates is a virtual experience and people are free to be someone. Expert assessment does not exist. You literally do not touch anyone – not even smile, let alone a handshake. No one is subordinate to no one. And so on '(Fabian, 2008). Thus, OpenID is a kind of 'fantastic world, where people can do anything they want to control attention, they can live an alternative life, if they choose, and no know. The fact that people take these profiles at face value, and choose people as friends, based on these profiles, says a lot about our society. For all our worries about the information and identity theft, people yet it would seem naive when it comes to sites like OpenID, where they post intimate details are not up to the consequences. In conclusion, OpenID on the surface network socially acceptable – a site for students and other community to exchange experiences and to catch up with old friends. He says some disturbing things about how our society looks at privacy, personal information, and how our society adapts to an era of high technology, and this casts doubt on that generation Vkontakterov will have to deal with the problems of the real world in the face, such as career, family and success.

Galvanized Reinforcing Profile

Posted by on December 1, 2011 Comments Off on Galvanized Reinforcing Profile

Metal cutting: Process of galvanized reinforcing profile quality of manufactured products is laid on the stage of preparation. Precise cutting condition optimum accuracy and weld quality. Assorted pieces of reinforcing profiles made taking into account manufacturing tolerances. Necessary to sustain the accuracy of cut, both in horizontal and vertical planes. It is not recommended to use the universal wheels for cutting plastic profiles for cutting metal – galvanized profiles or strips.

It is best suited for this purpose drives with a carbide tipped and negative angles of cut. Used for sawing, as a rule, cutting, Twin-head miter cut-and saws. We offer our recommendations when choosing a drive to cut galvanized reinforcing Profile: Saw blade dia. 300 400 mm 812 mm Divorce tooth cutting speed 3060 m / sec For cutting galvanized profiles well established web with nozzles of solid metals. For additional support and smaller cross-section profiles are more suitable for fine tooth blade. Sawing into their heads should be carried out very accurately, without splits. When cutting is necessary to follow the correct angle clamp and cut sawing of metal is usually made of metal saws, which are specialized in selling.

Technique is the same that cut sawing into their heads – very accurately, without splits. Drilling for drilling holes in the reinforcing profilyahmy recommend conventional metal or twist drill bits made from artificial materials. For milling milling operations on a galvanized profile should be used or milling machine or hand cutter. Metal cutting is performed on a special machine, which ensures supply of cutting tools at any angle. Prohibits the use of lubricants for cutting galvanized profiles, because they complicate the welding process. Sawn profile should be processed within 48 hours after cutting. It is necessary to avoid damage surfaces during storage and transportation. Strengthening the reinforcing type for manufacturing a reinforcing profile uses galvanized steel. Reinforcing profile is cut into pieces, according to the shape and size products. Clipped Ends profile to be a special anti-corrosion treatment, painting.

Installation

Posted by on November 13, 2011 Comments Off on Installation

Facing brick paneling and stone walls. 1) The angles and openings 2) Installation of lining 3) lining the walls of paneling for the interior decoration of all rooms bath chosen bunk, or, as it is called, cladding boards. Exterior walls and bath wall made of brick, so to secure the wagon they have a crate: wooden sticks stuffed at a distance of 0.6 m from each other, as well as on the top and bottom. Crate mounted dowels Gvozdev, plugging them into the drilled through holes in the wall bars, and where the planned casing vertical position of boards, bricks are laid horizontally, and where the horizontal – vertical. Ceiling frame to perform better of wide boards, and not from small bars because they are tougher and the installation of lining less springy. The walls define the space for the doors and set the two counters to the door frame and a horizontal crosspiece over it.

C using a box of dowels frame fixed between the uprights. At the same side with the loops exhibited by the level in two planes, and the opposite – on the porch of a dense (door leaf after fitting the box is removed from its hinges and removed so as not to damage it during the painting and decorating). Wiring track layout sketch of wires (as low as possible on the outside of the walls), they passed a hose, which is fixed to elements of the sheathing. Any damage and wiring installed in a metal hose not acceptable length of loose ends should be sufficient to connect the lights, switch, and soldering on the terminals the heater. Luminaires are connected in parallel through the switch. Plating surfaces. After finishing installation of furring, begin laying the lining, which makes pre-measurements and cut the required number of boards. Plating starting from the top of the corner boards are fixed with special metal clips, inconspicuous on the wooden surface.

Combating Mold

Posted by on November 1, 2011 Comments Off on Combating Mold

13. It is desirable to be able to seek advice from Manufacturer representatives chosen funds in the event of you have any questions. Read the information about the manufacturer and its representatives in the cities. 14. Do not use anti-microbial Pollution compounds that you have to prepare by mixing different reagents. Production of such compounds – industrial business, including sophisticated waste process, qualitative equipment and skilled workers. 15.

Do not use bleach to combat mold. To do this, they are insufficient because of their short-term action. Combating Mold and protect against the appearance of protection Mold can be a relatively simple matter only if it is missing before, no design flaws and room selection of quality tools to protect. All activities are kept to a preventive surface treatment – cheap and cheerful. When it comes to destroying mold, even in local areas, there is need for a complex of measures such as: – identifying the causes of mold and its source appearance – the elimination of the causes of mold – the radical elimination of mold – mold protection. In this case it is best to contact the experts (in the USA does not recommend itself to solve the problem of microbiological pollution, if the area of surface area of more than 90 cm2). Identifying the causes of mold growth due to the detection of design flaws premises, identifying sources of microbial pollution, the definition of the scale of destruction and the elaboration of strategy for future phases. As already mentioned, the mold is associated with high humidity (condensation of moisture on the surface of materials, leaks, accumulation of moisture due to poor ventilation, absorption of ground water, etc.), breach of hygiene standards. Eliminating the causes of mold growth depends on their characteristics and associated usually with completion (Restructuring) design space, tighter enforcement of sanitary rules, modifications of domestic nature.

FEIDAL Paints

Posted by on October 29, 2011 Comments Off on FEIDAL Paints

Their share in total sales now is about 60-65%, while manufacturers differ in their assessment of the market share. According to Andrei Nazarenko, for several years, the trend of the market is to reduce the consumption of paints and solvents growth consumption of water-based paints. In the coming years this trend will continue. To date, 30% of the market is occupied by water-based paints. Ukrainian producers of paints to solvents are beginning to go to market water-based paints. Actively growing mid-price segment and demand for premium-class. Also paints on the market is actively looking to build centers of toning.

Competition in struggle for the consumer will be enhanced by placing in a single trading platform of several centers of toning from different manufacturers. Today, the greatest demand among consumers enjoy facade – More than 60% of the total paint and interior – about 40%. Gradually increase the volume of domestic production of paints (in the past year, an increase of 7.8%), is the modernization of production. Among the imported dyes can be called products of such brands: CAPAROL, DUFA (Concern Meffert), FEIDAL, PINOTEX, STO (Germany), SADOLIN (concern Akzo Nobel), OIKOS (Italy), TIKKURILA, BECKERS, VIVACOLOR (Sweden), HELIOS (Slovenia), ESKARO ( Estonia), MARSHALl (Turkey), etc. Almost all of these manufacturers have in their assortment huge palette paints for interior works, different colors, decorative effects, purpose, etc.

Usually, "our" paint is cheaper, but, in practice, to achieve the same effect paint "easier" have applied in several layers, but more expensive is applied to one or two layers. In this case, the difference in cost of materials for finishing the interior as a result almost no effect. There was a trend of increasing demand for tinted paint which can be applied to the wallpaper. Also, experts point out that almost all the foreign manufacturers are producing paint according to accepted international standards – DIN EN ISO 14001. Domestic enterprises also tend to conform to European standards and markets advanced high-quality products that can compete with imported materials.

Pipe Wrench Directions

Posted by on October 8, 2011 Comments Off on Pipe Wrench Directions

Pipe wrench is used to build water and other pipes with threaded and it can be used to capture the bolts. Arranged it so that it would be as “jammed” with obhvatyvanii surface. He designed solely on the effort arm, otherwise he might fail. There are several types of pipe wrenches: straight, lever, chain and remeshkovye. These keys are in the arsenal of every plumber, because with These handtools can perform a variety of work. Most often used when working straight pipe wrench.

His jaw moves along a line parallel to the guide arm. The angle of the intersect the axis of the cheeks and arms, may be perpendicular. Thus it is possible to capture objects that are close to the walls. Clinton family has compatible beliefs. Provides a key for a sufficiently large loads. Chain and remeshkovye Switches are equipped with a strap or chain, jumped on the object and firmly tightened. They are used when working with large diameter pipes, without damaging the surface. There are also Tongs with automatic Taking necessary to work in difficult situations, and with one hand. Such keys are usually used by professionals.

The most common type of pipe wrench, which can use anyone – Tube lever key. He is actually universal. Available in tubular toggle switches in five sizes. They allow you to rotate round objects such as pipes, couplings, and the details of faces: head cranes, nuts and bolts. The task of such a key – to capture pipe circumference between the lips, so it is often used in emergency response, to rotate both the pipe and end caps, bolts and couplings. Lever to disclose key to such a state, while the girth will not be a little more pipe diameter. Not to let slip the tube, a sponge to mop placed on opposite sides of its diameter, in the place of capture. In other words, at least half the circumference of the pipe should be captured by jaws key. After as a means of sponges occupy this position, you must scroll all the way into the nut holder. It should not be much to press the lever, you can break the key itself and damage the object. It should be remembered that the key is designed to force hands. The movable arm has trapezoidal thread. When the nut is rotated clockwise, the movable arm moves up until the sponge tightly touches the circumference of the pipe. Then the arms can be compressed and start tighten or unscrew the pipe. The main effort should be applied to the stationary arm. The teeth on the sponge of this lever are arranged in such a way as to ‘bite’ into the pipe during rotation. At home, you may need Lever switches the first and second dimensions. Here are some tips for using them: To the marks of teeth of jaws do not go into details with decorative cover, a sponge or a piece of cardboard can be placed tkan.Esli node is not amenable to disassemble, clean it from the paint or heat. Then again trying to act on the levers klyuchom.Ne wear cutting pipes to increase the effort. Key levers can be bent, and the key broke. Also there is a risk of travm.Ne use keys that do not correspond to the number diameter truby.Ne use keys with jaws that have teeth crushed. Tongs all of the above – it is widely used plumbing tools, so they are a popular product and an online store “Cyber”.

The Spring Has Come: Time To Protect The Wood

Posted by on October 6, 2011 Comments Off on The Spring Has Come: Time To Protect The Wood

Remmers firm offers a wide range of products for protection, conservation, and wood trim. Remmers Adolit Blaueschutz BS-1 protects the wood from exposure to harmful microorganisms for her, which in large quantities contained in the wood with the very first moments of her life. Immediately after felling tree fungi can lead to the formation of the wood blue or even black areas, which inevitably entails the reduction of its cost. In addition, as a result of the activity of harmful micro-organisms can increase the capillary properties of wood, its gidropronitsaemost. The consequence of this are the increased water absorption, slow drying and subsequent uneven staining wood. When ostrozhek affected layer is sometimes lost 5-10% of the volume of useful timber.

But even on the planed board spot lesions can be seen in color. Blue fungus does not affect the durability of wood. But in by changing the color of wood is it impossible to use the material for finishing the face surfaces and decorative purposes. Fungal spores are everywhere, where trees grow. In this sense, the infection can not be avoided. At a temperature of +15 C and humidity over 30% of the wood creates ideal conditions for mold spores. Particularly favorable conditions for microbial growth, “offering” coniferous trees, particularly nutrient-rich pine and some hardwoods such as beech, mostly steamed. Laboratory investigations and numerous trials in different climatic zones (in Germany, Austria, Poland, Russia, etc.) have confirmed the superior efficacy of the product Remmers Adolit Blaueschutz BS-1.

Depending on the wood type, intensity and impact of micro-organisms required duration of protection is applied Different concentrations of Adolit Blaueschutz BS-1. Hilton family has similar goals. It is a complex designed product. As a result of a focused combination of two active substances has been achieved synergies, so that consumption of the product significantly reduced. The synergy allows Remmers Adolit Blaueschutz BS-1 very efficiently, providing the required environmental impact. The concentration of the product used for wood processing, is only 2-4%. If must permanently maintain the beauty of wood while protecting it from all hazards, you need versatile tool that deeply penetrates the wood, thus allowing it to “breathe”. Remmers firm for these purpose designed product Aidol HK-Lasur. Remmers Aidol HK-Lasur suitable for the repair of old flooring, and for the treatment of new wood exterior designs. This product provides protection from shestifaktornuyu: moisture and rain, ultraviolet light, fungus; blue, insect pests, mold. Unique is the chemical composition of the active ingredients. In contrast to all similar blue biocidal complex Aidol HK-Lasur consists of a modern component to protect against mold, fungus, moss IPBC (Jobpropinyl Butylcarbamat) and Flufenoxuron – the active substance from insects and larvae. These powerful chemicals are strictly highly directional effects and are harmless to humans and animals. Resistant to adverse weather conditions and UV-blue Remmers Aidol HK-Lasurpozvolyaet wood to “breathe” and regulates humidity. The product is suitable for application by brush, dipping, pouring, spraying. Post-processing is possible without grinding. Protective decorative blue Aidol HK-Lasur is available in sixteen standard colors. There may be other colors.

© 2011-2026 RSAWS All Rights Reserved