Tag Archives: construction and repair

Waterproofing

That's even if the Customer suffers or operating organization with leaking. Prove the fact of marriage in the production of waterproofing work underground part of a couple of years is almost impossible because there is no access for the inspection of waterproofing. Bring to repair sub-contractor is also problematic. In response to hear: "Guys! We will have passed waterproofing on the act, and you hurt her (which, incidentally, also happen)! Here and fix yourself! ". In the arbitration to go, too, there is nothing, because the customer (the contractor) of the respective acts of violation committed by a subcontractor under Waterproofing operations there. Already there are instances when purchasing parking in the underground parking buyer poses a drip leak, wet-paint the rusty foreign-made car, which a year later again covered red spots. Further, in the course are the statements, they say, put doroguschy "swallow", and it has rotted from the water dripping, everybody saw it. Compensate! And such cases in the courts are won! Because the waterproofing is the hidden works control the quality of work and fix the violation is possible only at the stage of execution of works, because then waterproofing carpet is covered with a protective structures or littered ground.

Still have know what and how to control. And when you commit the violation, you must specify how the requirement of a snip broken, why should first study the relevant regulatory framework. Thus, technical oversight of waterproofing work may be done by trained personnel with appropriate knowledge and has at its disposal the necessary equipment. Our engineers provide technical support for waterproofing work at many sites in Moscow. The result of lessons learned was the development of relevant regulations with provisions for various stages testing of waterproofing works:-check the documentation on the waterproofing and support materials;-checking the appearance of the waterproofing and support materials;-checked that the set waterproofing material factory production;-testing equipment contractor;-checking the mating surfaces of the insulated and structures;-verification technology waterproofing work;-test quality waterproofing work, the order of selection and storage of samples of waterproofing;-checking the storage conditions of waterproofing materials.

Important not to nit-picker to contractors, and require the correct execution All major and related process steps. Brad Pitt has plenty of information regarding this issue. Including operated by other contractors of construction works. Such as the preparation of the surface structure of pit enclosure in the subsequent construction the pressure wall, the unit slip plane in the presence of bias stress in the area of waterproofing, concrete reinforcement training under the foundation slab for the perception of boundary efforts and much more. Before begin the next stage, contractors should be aware of what and how you will be checked.

Choosing Furniture

Whatever it was, but every normal person a certain part of the usual personal life in the bathroom. Actually in this case, most of them, whatever free man, standing up in the morning, the very first thing does trip to the bathroom, then in principle it is possible should assume that every day has already started. In turn, in principle, before going to bed a normal person also goes to the bathroom. Given even this here Attendance bathroom, you can with the responsibility to say that the bathroom in any form will be reflected on the real life of any person, in general, and state of mind in particular. Connect with other leaders such as Peter Thiel here. For example, if the bathroom of course has an attractive interior design, is equipped with quality fixtures, and thus furnished a practical and trendy furniture, and every person who visited this room will clearly be a great spiritual mood, directly in the early identification of each day and before going to bed. Frankly speaking, if the facility does not meet the previously stated criteria, it should rather be to bring it to the appropriate view.

Given the factor that, in general, in an atmosphere in the bathroom importance clearly has an existing furniture, considerable attention should allocate her choice. To date, this is real exercise, using modern technologies, particularly referring to the respective Internet portal. Typically, the bathrooms are, say, in a variant of private apartments will have a similar layout, but because the available option is acceptable in principle to buy the standard furniture. Of course, immediately it is worth some attention on the quality of the furniture and, accordingly, the coloring, which must fully conceived approach to the style of interior design bathroom. Coming to a website, there really is at home to get acquainted with the assortment of products offered, and no problem to choose let's say, for example demanded a container for a bath. In an embodiment, if no increased wishes to acquire a standard furniture, especially if a unique opportunity to the area, the better to draw attention to its own production bathroom furniture, which itself is engaged in a professional organization. As now used in furniture production and quality, and in addition to environmentally friendly materials and cutting edge technology.

As a result of furniture will not only stylish, but it is convenient and of course durable. Actually, with the possibility to issue an order for production of furniture made to order, with appropriate selection of material and natural colors. For example buying cabinets for the bathroom, right on the Web site of industrial firms may not only purchase the most suitable configuration of one or other furniture, and accordingly do not worry for transportation and highly accurate editing. The above will come available, due to the fact that this company has its own road will bring the bought the furniture in convenient time. And also, demanded the installation of bathroom furniture will carry professional experts of the organization. This plan will only pay for furniture, and later enjoy a chic and modern bathroom, getting at the same time, pleasure, and of course charge a good mood no matter what time of day or night.

The Condition

And the height of perfection – mesh netting with a polymer coating, which requires almost no care at all! Fencing of this grid is not subject to corrosion and does not need painting, it saves energy and resources into the future. After painting the fence once in a year or two might like to, if only children for whom it quickly fun than work, though, after them you will have to work hard to give your fence a presentable appearance appropriate. After all, any house, land or municipal building, begins with a fence, it is his person, and that is why it must be flawless. The next version of the fence – a welded wire mesh, which is made from a solid straight wire, which gives it great strength, despite the external weightlessness. Welded wire mesh also divided into a grid of welded construction, which is suitable for fencing of construction sites and other facilities, involving construction of an inexpensive fence, with the installation as soon as possible, welded wire mesh galvanized (sstsp), which are well equipped for the role of fences of the same country sites, parking lots, area businesses, also want to distinguish among them welded mesh with a polymer coating, which is not need additional care, including painting, and looks great in the overall composition of your house or some official agency.

Particular attention would be desirable to give a decorative grid Suite, all with the same coated, but of galvanized wire, which is notable for its amazing durability, even under the condition of mechanical damage to the coating of the grid. From the same series of distinguished decorative welded wire mesh Openwork, constructed of conventional wire-coated, which has slightly different dimensions for height, and differs from other forms of cells. It is mainly used to protect front gardens, lawns and similar areas. This mesh looks much nicer and presentable, as compared with its counterpart, thanks to its top, having a finished appearance. There is also a more practical and functional form fencing – is welded panel fence. All elements of the modular enclosure made of stainless steel, hot-dip galvanized and powder coated in color with ral. Modern coating technology (powder coating and hot zinc) provide corrosion resistance panel fence for many years. Welded mesh fence has a very wide range of applicability, from fencing the territory of kindergartens and schools, ending the regime objects on the territory of which must have high quality and durable Perimeter fence.

Frame-panel Houses

Frame-panel houses easy enough and do not require massive foundations, which further reduces the cost of construction. A two-storey house with total area of 200 square meters weighs less than 20 tons. For these homes recommended use monolithic slab or lightweight strip foundations. However, framing the Canadian technology is very significant to many people lack – a very limited architectural solutions. After designing 'Canadian' skeleton-timber frame houses is based on the capabilities of standardized production and not due to fly thought the architect, designer.

The motto of the frame construction can be expressed in the following way: 'sufficiently comfortable with the minimum costs and architectural delights. " Some people built a house like this for a long time does not leave a feeling of living in a hotel. The service life of frame-panel house depends primarily on how and from which timber is made of mesh. The main enemy – the humidity. If the frame is built from properly dried wood, it will not crack, does not warp or lose in this regard, his strength. But in Russia, not many companies that are equipped with equipment and technology, allowing the timber, suitable for the construction of frame-panel houses. After all, it must be carefully dried, observing all the subtleties of the process, and then another, and to impregnate the particular protective compounds that prevent rot, insect, and also (together) fire. How strong is the design frame houses? Of course, the 'Canadian' skeleton-shield house – it's not a brick, and certainly not High-quality medieval fortress.

The Advantages Of Laminated Veneer Lumber

Glued laminated timber is considered one of the best materials for building houses. Thanks to the technological features of its production, we have at the output of a unique mother, preserving the advantages of wood such as high insulation and low thermal conductivity. At the same time and add their own individual benefits: the minimum rate of shrinkage (1%). Achieving such a measure is possible only because production of laminated veneer lumber made by gluing dried thoroughly slats. Number of lamellae in a single rod can be different: from 2 to 6. The minimum size of the cross section of the laminated board is 160 mm, the maximum is about 280 mm. This thickness of the material allows, in some cases not to use extra insulation. However, professional builders are still advised not to abandon it when building a house for a permanent year-round residence.

In this case, the recommended size of the cross section of laminated veneer lumber for these houses should be no less than 200 mm. In the case of the construction of summer homes, lateral section may not be less than 160 mm. Glued laminated timber – a material that does not require an additional trim. Beautiful polished smooth surface of the wooden beams will create a unique individual interior of your home. Log houses – one of the most advanced areas of construction in recent years. It is experiencing rapid growth and development. And, despite the high cost of material, quantity constructed from the his house is constantly increasing.

Frame And Sash

Joinery – is part of the window element, which is rigidly connected to the wall. In another way it can still be called 'a window box. " In some cases, the frame itself can hold the glass, that is, no additional elements in No window (wings, bars). In this case we speak of 'blank window', ie the window that is not open. Putting it makes sense when you're not going to use a window for ventilation. For example, if a small window out into a dull patio. Instead of glass in such a case, with a decorative purpose, you can insert stained glass.

Sash – the movable element of the window. Depending on the type of connection to the sash frame can open the doors, recline, or opened by rotating around a vertical or horizontal axis, and the window can be opened in different directions. Windows can be as solid, with two or three solid doors – in Most modern windows, and have a window and transoms. Ventilator – a small flap, connected to the frame. Designed ventilator for ventilation of rooms, especially during the cold period, when all the big open fold inappropriate. Transom – a flap that pivots the lower horizontal axis. As a rule, it is located at the top of the window. Windows with transoms are more characteristic of old structures, though if you want you complementary profiles included in each other, the partition between the doors are not needed.

These doors are called "wings of shtulpom. Shtulp – this bill profile, mounted on one of the wings to create a porch in Bivalve windows and doors. Deaf can not only be the entire window (when the windows are inserted directly into the frame), but also a separate wing. In this case, it does not open. This design is typical for two-or tricuspid windows.

© 2011-2019 RSAWS All Rights Reserved