Tag Archives: materials

Fire, Water And Copper Pipes

Its hard to imagine our lives, our modern world, with a leaky pipe, current taps, poor water quality, and sometimes turning off the water (as usually happens in summer), to replace the pipe. This is our reality. In this article I would like to touch on this theme – the theme of strong pipes and calm nerves. How to replace the pipe? Who to contact? What kind of pipes you choose? As far as they are durable and reliable? Will try to answer these and many related issues. Pipes are used in heating, water supply and sanitation. In modern houses in the main are: – copper – steel – plastic; Copper pipes, unlike steel and plastic more expensive, but steel and plastic are less durable and reliable, are overgrown with lime and rust. It would seem that there is no middle ground and can not, here would be to combine all dignity and to remove all deficiencies.

There are two types of pipes: – metal – polypropylene, I would like to elaborate on them. Metal pipes – it is one piece, laser-welded “Butt” or ultrasound “overlap” aluminum pipe, protected inside and outside the plastic layers. The inner protective layer makes the tube much smoother than metal. Therefore, rust and lime is difficult to “Catch” for plastic. So, the inner surface of the pipe for longer stays clean, less risk, which would flow. The outer plastic layer protects the pipe from outside influences and serves as an insulator from the metal condensation of moisture.

Glued Laminated Timber

If you choose wood material for her new home, before you select a specific wall material, we suggest you compare the two options. It profiled bar, dried to a moisture content of 18-20% and normal laminated veneer lumber. First of all, find out why dried and glued timber. It turns out to give it greater strength, minimal exposure to strain and shrinkage. Glued laminated timber has a moisture content 11-14% and, therefore, not shrinks and is not gives the cracks.

Dry profiled bar, dried our special technology, has a uniform final moisture content throughout the volume of timber – 18-20%. The remaining advantages of these materials is that the walls of the house will not only have the original appearance, but also absent is necessary in the subsequent finishing. Compared with other materials, laminated veneer lumber and dry shaped beam has a higher mechanical strength, resistance to decay. Need noted that the laminated board in the finished product after a certain period of time gaining moisture from the environment to chtremyas thus the equilibrium of 18-20% that of the dry-profiled bar. The undoubted advantages of the laminated board can be attributed, and that it can be up to 18 m in length (for comparison: the maximum length of regular shaped timber – 6 m), although in practice very rarely used material of this size. When assistance of competent design solutions can easily avoid the use of long workpieces. Assembling such a house is greatly simplified due to the smaller number of assembly parts.

Applying Liquid Wallpaper

In liquid wallpaper many advantages. Get at least to the fact that they line the walls, serve as good sound insulation, easy to clean and do not burn. And although the 'glue' them on the wall is much more complicated, they are worth a try. Tools and Materials: 1. Liquid wallpaper, water, color liquid wallpaper 2. Oil paint 3.

Trowel 4. Paint roller and the relief cushion Process: 1. Clean walls. It should be dry and chistoyochischennoy: carefully remove the old wallpaper and whitewash, remove Possible nails and screws, remove the switches and sockets. 2. Before applying the liquid wallpaper wall covering experts advise regular oil paint.

3. Preparing the mixture. Dilute the contents of water in the proportions of these on the package, and carefully stir until smooth. Remember that wall from corner to corner should be covered with material from one batch, so it is better to cook once in abundance. Residues can then be added to the new batch. When using Colora, it should be dissolved according to instructions in the water, then pour the colored water into the tank with another dry mixture of liquid wallpaper. Other additions to the wallpaper, too, should be mixed in the dry state. 4. Covers the walls liquid wallpaper. Apply the ready-mix with a trowel on the wall and the same smooths out the same trowel or paint roller (foam or velyurnym with short pile) to a thickness of 1-2 mm. 5. After 5-6 hours you can walk above the special relief roller to give texture. In this case, care must be taken regularly dampened with water so as not to damage the layer of wallpaper. 6. Give the walls dry completely. It may take up to two days.

© 2011-2021 RSAWS All Rights Reserved